eth bridge dynvlan add
Add a dynamic VLAN membership entry.
SYNTAX:
eth bridge dynvlan add
where:
id
hwaddr
vlan
remvlan
256
[id = <number{0-100000}]>
hwaddr = <masked-hardware-address>
vlan = <{default}>
[remvlan = <{default}]>
The id of the dynamic VLAN membership entry.
The (masked) ethernet MAC address of the
dynamic VLAN membership entry.
The VLAN for the dynamic VLAN membership
entry.
The VLAN that will be removed from the bridge
interface.
eth Commands
OPTIONAL
REQUIRED
REQUIRED
OPTIONAL
E-DOC-CTC-20071119-0014 v1.0