Atm Oam Cc Modify - THOMSON TG576 v7 Reference Manual

atm Commands

atm oam cc modify

Modify CC on the connection.
SYNTAX:
atm oam cc modify
where:
port
vpi
vci
transmit
receive
auto
span
E-DOC-CTC-20071119-0014 v1.0
port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or
number>
vpi = <number{0-31}>
[vci = <number{0-511}]>
[transmit = <{disabled|enabled}]>
[receive = <{disabled|enabled}]>
[auto = <{disabled|enabled}]>
[span = <{segment|end2end}]>
The ATM port number.
The Virtual Path Identifier.
The Virtual Channel Identifier.
Enable/disable transmission of CC cells.
Enable/disable loss of continuity.
Enable/disable remote CC activation/
deactivation.
End2end or segment continuity check.
REQUIRED
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
45