traceroute Command
traceroute Command
Send ICMP/UDP packets to trace the ip path.
SYNTAX:
traceroute
where:
addr
count
size
interval
maxhops
dstport
maxfail
type
utime
E-DOC-CTC-20071119-0014 v1.0
addr = <ip-address>
[count = <number{1-10}]>
[size = <number{1-20000}]>
[interval = <number{1000-60000}]>
[maxhops = <number{1-255}]>
[dstport = <number{1-65535}]>
[maxfail = <number{0-255}]>
[type = <{icmp|udp}]>
[utime = <{disabled|enabled}]>
The destination IP address.
The number of times to reissue a traceroute
request with the same time to live.
The size of the packet payload.
The interval in milliseconds between packets.
The upper limit on the number of routers
through which a packet can pass.
The UDP destination port number to send to.
The max number of consecutive timeouts
allowed before terminating a traceroute request.
The type of traceroute packet(s).
Display time in useconds.
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
667