Eth Switch Shaper Config - THOMSON TG576 v7 Reference Manual

Residential dsl gateway

Hide thumbs Also See for TG576 v7:

Table of Contents

eth Commands

eth switch shaper config

Configure common ingress shaper parameters.

eth switch shaper config

E-DOC-CTC-20071119-0014 v1.0

shaper = <number{0--1}>

[unicast = <{enabled|disabled}]>

[multicast = <{enabled|disabled}]>

[broadcast = <{enabled|disabled}]>

[control = <{enabled|disabled}]>

[unknown = <{enabled|disabled}]>

[discard = <{enabled|disabled}]>

The shaper instance.

Shape unicast traffic.

Shape multicast traffic.

Shape broadcast traffic.

Shape MAC control traffic.

Shape traffic with unknown destination address.

Discard frame at overflow (else attempt for flow