firewall Commands
firewall config
Display/Modify firewall configuration.
SYNTAX:
firewall config
where:
state
keep
tcpchecks
udpchecks
icmpchecks
logdefault
logthreshold
tcpwindow
E-DOC-CTC-20071119-0014 v1.0
[state = <{disabled|enabled}]>
[keep = <{disabled|enabled}]>
[tcpchecks = <{none|fast|exact}]>
[udpchecks = <{disabled|enabled}]>
[icmpchecks = <{disabled|enabled}]>
[logdefault = <{disabled|enabled}]>
[logthreshold = <{disabled|enabled}]>
[tcpwindow = <number{0-1073725440}]>
Disable/Enable the firewall.
Disable/Enable keeping existing connections
when firewall rules change.
Select level of TCP checks.
Disable/Enable UDP checks.
Disable/Enable ICMP checks.
Disable/Enable logging of default firewall rule.
Disable/Enable log thresholding.
Modify the tcpwindow for fast TCP checks
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
347
Need help?
Do you have a question about the TG576 v7 and is the answer not in the manual?
Questions and answers