Table of Contents
Advertisement
Magnum 6K8-Series Industrial Field Switch
half duplex hub to connect to the switch through 10Mb fiber ports. Whereas the 100Mb
ST fiber module, allow to connect the 100Mb demand of Switch devices. It supports
distances according to the 10Base-FL standard i.e, 2Km distance for multi-mode fiber.
(Single-mode for 10Km distance may be available as a special order).
received, a Link (LK) LED indicating proper connectivity with the remote device when
lit, and FDX/HDX LED indicating full-duplex mode when lit (or half-duplex if off).
5.2.2. 6KP6-RJMSC 4@10/100Mbps RJ-45 and 2@100Mb multi-mode FX-
SC "snap-in" Fiber connector
The Magnum 6KP6-
RJMSC is also a Combo 6 Port
module equipped with 4 10/100Mb
RJ-45 ports along with 2 multi-
mode 100Mbps fiber optic
transceivers all in one module. This
is similar to the 6K6-RJMST. It has
the same LEDs indicating port
activity (ACT), Link (LK), and
FDX / HDX and 10/100 operation, and the same face-plate lettering.
While the functionality of these two modules is essentially the same, the 6KP6-
RJMSC is equipped with an SC-type "snap-in" connector instead of an ST-type.
5.2.3
6KP6-RJSSC 4@ 10/100Mbps RJ-45 Ports and 2@100Mbps
single-mode FX-SC-
type, "snap-in"
connector
The Magnum 6KP6-RJSSC
is also a Combo module
equipped with 4 dual speed
copper ports and 2 Single-
mode SC-type connectors. It
provides an advantage
through combining copper
and Fiber functions in one
module of the 6K8-Series Switch supporting four Copper and two single-mode fiber
www GarrettCom com
.
Each port has an Activity (ACT) LED indicating packets being
4 Port@ 10/100Mbps and 2 @100 Mb SSC Fiber Port
4
.
Installation and User Guide 03/06)
6KP6-RJMSC,
4 Port@ 10/100Mbps and 2 @100 Mb SC Fiber Port
1
10/100
F/H
ACT
4
F/H
2
TX
LK
1
LINK
3
ACTIVITY
6KP6-RJMSSC,
2
1
3
10/100
F/H
ACT
F/H
2
TX
LK
RX
1
2
LINK
4
3
ACTIVITY
48
2
3
5
7
LK
ACT
ACT
F/H
TX
LK
RX
RX
6
2
10/100
4
FULL/HALF
5
7
LK
ACT
ACT
F/H
TX
LK
RX
6
10/100
FULL/HALF
1
3
1
3
Advertisement
Table of Contents
