Magnum 6K25e Gigabit Fiber Switch
fiber ports. Whereas the 100Mb ST module allow to connect the 100Mb demand of
Switch devices. It supports distances according to the 10Base-FL standard i.e, 2Km
distance for multi-mode fiber. (Single-mode for 10Km distance may be available as a
special order).
received, a Link (LK) LED indicating proper connectivity with the remote device when
lit, and FDX/HDX LED indicating full-duplex mode when lit (or half-duplex if off).
5.2.2. 6KP6-RJMSC 4@10/100Mbps RJ-45 and 2@100Mb multi-mode FX-SC
"snap-in" Fiber connector
The Magnum 6KP6-
RJMSC is also a Combo 6 Port
module equipped with 4 10/100Mb
RJ-45 ports along with 2 multi-
mode 100Mbps fiber optic
transceivers all in one module. This
is similar to the 6K6-RJMST. It has
the same LEDs indicating port
activity (ACT), Link (LK), and
FDX / HDX and 10/100 operation, and the same face-plate lettering.
While the functionality of these two modules is essentially the same, the 6KP6-
RJMSC is equipped with an SC-type "snap-in" connector instead of an ST-type.
5.2.3
6KP6-RJSSC 4@ 10/100Mbps RJ-45 Ports and 2@100Mbps single-mode
FX-SC-type, "snap-in" connector
The Magnum 6KP6-RJSSC
is also a Combo module
equipped with 4 dual speed
copper ports and 2 Single-
mode SC-type connectors. It
provides an advantage
through combining copper
and Fiber functions in one
module of the 6K25e Switch
supporting four Copper and two single-mode fiber network segments.
www GarrettCom com
.
Each port has an Activity (ACT) LED indicating packets being
4 Port@ 10/100Mbps and 2 @100 Mb SSC Fiber Port
4
.
Installation and User Guide (10/07)
6KP6-RJMSC,
4 Port@ 10/100Mbps and 2 @100 Mb SC Fiber Port
1
10/100
F/H
ACT
4
F/H
2
TX
LK
1
LINK
3
ACTIVITY
6KP6-RJMSSC,
2
1
3
10/100
F/H
ACT
F/H
2
TX
LK
RX
1
LINK
3
ACTIVITY
46
2
3
5
7
LK
ACT
ACT
F/H
TX
LK
RX
RX
6
2
10/100
4
FULL/HALF
5
7
LK
ACT
ACT
F/H
TX
LK
RX
6
2
10/100
4
FULL/HALF
1
3
1
3