Qpm-Msc 100Mbps Multi-Mode Fx-Sc Quad-Port, "Snap - GarrettCom Magnum Quad-Series Installation And User Manual

Magnum Quad-Series Fiber Switches
5.2.2 QPM-MSC 100Mbps multi-mode FX-SC Quad-port, "snap-in"
connector
The Magnum QPM-MSC is a multi-
mode 100Mbps fiber optic transceiver m
similar to the QPM-MST. It has the same LEDs
indicating port activity (ACT), Link (LK), and
FDX or HDX operation, and the same face-plate
lettering.
While the functionality
modul es is essentially the same, the QPM-MSC is equipped with an SC-type "snap-in"
connector instead of an ST-type.
5.2.3 QPM-SSC 100Mbps single-mod FX-SC-type, "snap-in" connector
The Magnum QPM-SSC is a
single-mode 100Mbps fiber optic
module equipped with a dual SC-type
connector. It functions as a fib
transceiver to the Quad-Switches,
supporting four single-mode fiber
network segments.
The QPM-SSC, when installed
in a M agn um Quad-Series Fiber Switch
operating at 100Mbps full-duplex,
supports single-mode fiber cable lengt
Section 4.5)
Each port has an Activity
Link (LK) LED that indicates prop
FDX/HDX LED to i
distinguis h the single-mode QPM-SSC fr
M." is at the top of the faceplate of the Q
www GarrettCom com . .
odule,
of these two
er optic
hs of as much as 25+ Km (see Power Budget,
(ACT) LED indicating packets being received, a
er connectivity with the remote device when lit, and a
ndicate full-duplex mode when lit (or half-duplex when off). To
Installation and User Guide (06/03)
3
e
100BASE-FX Single-Mode
SC Connectors
3
FDX/HDX
1
LK
1
ACT
2
3
4
ACTIVITY
1
3
om the multi-mode QPM-MSC, the label "Sgl.
PM-SSC.
37
100BASE-FX Multi-Mode
SC Connectors
2
FDX/HDX 1 2 3 4
ACT
LK
1
ACT
2
3
4
4
ACTIVITY
2
1 LINK
FULL/HALF
3
DUPLEX MODE
2
2 3 4
ACT
2
LINK
FULL/HALF
DUPLEX MODE
1
1