6Kp6-Rjmsc Multi-Mode Fx-Sc "Snap-In" Module; 6Kp6-Rjssc Mbps Single-Mode Fx-Sc-Type, "Snap-In - GarrettCom Magnum 6K32F Installation And User Manual

Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (05/08)
provide a convenient way for the half duplex hub to connect to the switch through 10Mb
fiber ports. Whereas the 100Mb ST module allows it to connect the 100Mb demand of
the Switch devices. It supports distances according to the 10Base-FL standard i.e, 2Km
distance for mu lti-mode fiber. (Single-mode for 10Km distance may be available as a
s pecial or der).
Each port has an Activity (ACT) LED indicating packets being received, a
Link (LK) LED indicating proper connectivity with the remote device when lit, and
F DX/HDX LED indicating full-duplex mode w
5 .2.2. 6KP6-RJMSC 4@10/100M
"snap-in" Fiber connector
The Magnum 6KP6-
RJMSC is also a Combo 6 Port
module equipped with 4
10/100Mb RJ-45 ports along
with 2 multi-mode 100Mbps
fiber optic transceivers all in
one module. This is similar t
the 6KP6-RJMST. It has the
same LEDs indicating port
activity (ACT), Link (LK
FDX / HDX and 10/100
operation , and the same face-plate lettering.
While the functionality of these two modules is essentially the same, the 6KP6-
R JMSC is equipped with an SC-type "snap-in" connector instead of an ST-type.
5.2.3 6KP6-RJSSC 4@ 10
FX-SC-type, "
in" connector
The Magnum 6KP6-RJSSC is
also a Combo module
equipped with 4 dual speed
copper ports and 2 Single-
mode SC-type connectors. It
provides an advantage through
combining copper and Fibe
www GarrettCom com .
o
), and
/100Mbps RJ-45 Ports and 2@100Mbps single-mode
snap-
r
.
hen lit (or half-duplex if off).
bps RJ-4 5 and 2@100Mb multi-mode FX-SC
50