Introduction; Inspecting The Package And Product - GarrettCom Magnum 6K8-Series Hardware Installation And User's Manual

Magnum 6K8-Series Industrial Field Switch
2.0

Introduction

2.1

Inspecting the Package and Product

Examine the shipping container for obvious damage prior to installing this
product; notify the carrier of any damage that you believe occurred during shipment or
delivery. Inspect the contents of this package for any signs of damage and ensure that
the items listed below are included.
This package should contain:
1 Magnum 6K8-Series Industrial Field Switch, base unit
(configured with user-selected port module options installed)
1 AC Power Cord (U.S. and other 115 VAC only) if AC version
1 Set of two metal vertical mounting brackets, with screws to the case
1 Installation and User Guide (this manual)
1 Product Registration Card
Remove the items from the shipping container. Be sure to keep the shipping
container should you need to re-ship the unit at a later date. To validate the product
warranty, please complete and return the enclosed Product Registration Card to
GarrettCom, Inc. as soon as possible.
In the event there are items missing or damaged, contact the party from whom
you purchased the product. If the unit needs to be returned, please use the original
shipping container if possible. Refer to Section 6, Troubleshooting, for specific return
procedures.
NOTE: This Hardware user- manual only contains the hardware related
information about the Magnum 6K8 and provides help for Network installation,
wiring, and other hardware features. Refer to our
management software features and configurations (e.g. VLANS, RSTP, SNMP,
RADIUS, TACACS etc.) using this URL-
www.garrettcom.com/techsupport/software/userguides/6kseries_softugrel3.pdf
www GarrettCom com . .
Installation and User Guide 03/06)
Software user Manual
7
for