GarrettCom Magnum 6K8-Series Hardware Installation And User's Manual page 25

Magnum 6K8-Series Industrial Field Switch
Example 2. In another outdoor Ethernet Traffic monitoring application, a managed
network is needed to provide a Redundant ring topology for a maximum redundant
network. This is needed where any faulty cable, cable disconnection or power failure in
a ring switch needs to be reconfigured in milliseconds . The ring topology of the network
consists of high speed LAN segments supported by 100Mbps full-duplex future-proof
fiber media to provide secure long distance LAN connections. The entire network is
sharing a higher bandwidth of multicast packets used for secure camera monitoring and
data-mining for the vital database located in a controlled center secured building. The
entire spread network will be manageable to provide easy, detectable, uninterrupted
support through a viewable SNMP monitor.
The NEMA TS-2 and TEES along with IP53 approval with the mix of copper
and fiber ports on the 6K8-Series Industrial Field Switch provides an economical and
seamless solution to the requirements. The user-configurable Magnum 6K8 provides an
extra boost to the network requirements by providing copper/fiber media along with the
higher bandwidth support of 10/100Mbps. The user can utilize the SNMP feature
equipped with 802.1Q VLAN, RMON, RSTP and other standard managed LAN features
to provide a secure and stable network.
The 6K8-Series Industrial Field with S-ring and Link-Loss-Learn feature easily
fulfilled the redundancy requirement in a secure and fast reconfiguration time for cable
breakup by setting up a ring topology.
SNMP
Monitor
CCTV
Fig. 2.4b-Magnum 6K8 equipped with S-Ring in redundant ring in a
outdoor Traffic application
www GarrettCom com .
Magnum 6K25
Magnum Magnum P 1
Magnum 1 3
10/ L 10/
Managed Fiber
Swi
F/ A F/
A A
A
F/ F/
GARR F/
2 TX
2 TX L T LK R
CCTV
.
Installation and User Guide 03/06)
A
F/
3
L
L 10/
2 4
A F/
A
A
L 10/
F/
1 3
L T LK R
CCTV
CCTV
20
Control Center
Interne
Route
CCTV