Related Manuals for GarrettCom Magnum 6KQ
Summary of Contents for GarrettCom Magnum 6KQ
- Page 1 Magnum 6KQ Managed Field Switch Hardware Installation and User Guide www GarrettCom com...
- Page 2 NEBS is a trademark of Telcordia Technologies UL is a registered trademark of Underwriters Laboratories GarrettCom, Magnum and Personal Switch are trademarks and Personal Hub is a registered trademark of GarrettCom, Inc. Important: The Magnum 6KQ Managed Field Switch contains no user serviceable parts.
- Page 3 Magnum 6KQ Managed Field Switch Installation & User Guide 04/07) Contacting GarrettCom, Inc Please use the mailing address, phone and fax numbers and email address listed below: GarrettCom, Inc. 47823 Westinghouse Dr. Fremont, CA 94539-7437 Phone (510) 438-9071 Fax (510) 438-9072 Website: http://www.GarrettCom.com...
-
Page 4: Table Of Contents
Magnum 6KQ Managed Field Switch Installation & User Guide 04/07) Table of Contents................Page SPECIFICATIONS ................1 Technical Specifications ..............1 Ordering Information ................4 Introduction.................... 6 Inspecting the Package and Product ............ 6 Product Description - Magnum 6KQ Field Switch......7 2.2.2... - Page 5 Magnum 6KQ Managed Field Switch Installation & User Guide 04/07) 5.2.2. 6KQF-2MSC Fiber connector ............ 37 5.2.3 6KQF-2SSCL FX-SC-type, Sgl.M ........... 37 5.2.4 6KQ3-RJMSC “COMBO” connector ........38 5.2.5 6KQ4-MT MTRJ Small-Form-factor ......... 38 5.2.6 6KQ4-RJMT, “COMBO” multi-mode FX , MTRJ Small-FF ... 39 5.2.7...
- Page 6 Magnum 6KQ Managed Field Switch Installation and User Guide (04/07) THE MAGNUM LINE Industrial networking products "Designed and Manufactured in the USA" Overview GARRETTCOM, INC. OFFERS THE PREMIUM-QUALITY MAGNUM™ LINE OF INDUSTRIAL CONECTIVITY PRODUCTS WITH INDUSTRY-STANDARD FUNCTIONALITY AND BUILT-IN FIBER CONFIGURABILITY. MAGNUM...
-
Page 7: Specifications
Magnum 6KQ Managed Field Switch Installation and User Guide (04/07) SPECIFICATIONS Technical Specifications Performance Filtering / Forwarding Rate: Ethernet(10Mb):14,880 pps Fast Ethernet(100Mb): 148,800 pps Gigabit Ethernet (1000Mb): 1, 488,000 pps Switching Processing Type: Store and Forward with IEEE 802.3x full-... - Page 8 Magnum 6KQ Managed Field Switch Installation and User Guide (04/07) 1000BASE-SX, full-duplex, multi-mode(50µm cable) - 550m 1000BASE-LX, full-duplex, single-mode(62.5µm cable) -5Km Fiber Multi-mode connector types supported: Fiber Port, ST-type (twist-lock):Fiber multi-mode, 10Mb 10BASE-FL Fiber Port, MTRJ-type (plug-in):SFF Fiber multi-mode100BASE-FX Fiber Port, SC-type (snap-in):Fiber optic multi-mode, 100BASE-FX Fiber Port, ST-type (twist-lock): Fiber optic m.-mode, 100BASE-FX...
- Page 9 Magnum 6KQ Managed Field Switch Installation and User Guide (04/07) 12 watts typical (for a small 4 port copper-only model) DC-DUAL POWER SOURCE (OPTIONAL) For DC internal power supplies at –48VDC, 24VDC and 125VDC, with the Dual-Source option ( for continuity of operation when either of the DC input , see Appendices B and C.
-
Page 10: Magnum 6Kq Managed Field Switch Installation & User Guide
Please use this URL: for the complete Configuration Guide for the Magnum 6KQ. http://www.garrettcom.com/techsupport/insertion_guides/6kqcg.pdf Configuration Options: Each Magnum 6KQ base unit may be configured with a choice of 3 modular slots. Following modules can be configured in Slot B and D (Slot C is 100Mb Fiber only) Magnum 6KQ Port Modules... - Page 11 Magnum 6KQ Managed Field Switch Installation and User Guide (04/07) 6KQF-4MT “4 ports” module, w/four 100Mb mm 2km FX MTRJ’s fiber ports 6KQF-4MLC “4 ports” module, w/four 100Mb mm 2km FX LC’s fiber ports 6KQF-4SLC “4 ports” module, w/four 100Mb Sm, 15km FX LC’s fiber ports 6KQF-2MST “2 ports”...
-
Page 12: Introduction
Magnum 6KQ Managed Field Switch Installation and User Guide (04/07) Introduction Inspecting the Package and Product Examine the shipping container for obvious damage prior to installing this product; notify the carrier of any damage that you believe occurred during shipment or delivery. -
Page 13: Product Description - Magnum 6Kq Field Switch
Designed for use in industrial applications such as factory floors and control cabinets, industrial video surveillance systems with PoE, power utility substations, tariffed carrier field facilities, or transportation and oil and gas, the rugged Magnum 6KQ handles stressful workloads (mixes of bursty data traffic and priority streaming traffic) as well as harsh environmental conditions. - Page 14 High performance features include non-blocking unicast traffic speed on all ports and 802.1p QoS Traffic Prioritization. Magnum 6KQ switches are “plug-and-play” and are designed for use in connecting edge devices such as PLCs, IEDs and PoE video cameras...
- Page 15 Magnum 6KQ Managed Field Switch Installation and User Guide (04/07) Alarm Relay contacts provided on each Magnum 6KQ Switch monitor the hardware and software through traps, providing a record of any losses of power signals and other user- defined software events. See Section 3.5 for details.
-
Page 16: Four-Port Copper Module, 6Kq4-Rj45
Magnum 6KQ Managed Field Switch Installation and User Guide (04/07) on the port. A fiber cable must be connected into a SFF port and the Link (LK) indicator for that port must be ON (indicating there is a powered-up device at the other end of the cable) in order for a LK LED to provide valid indications of operating conditions on that port. -
Page 17: 2.2.4 Two-Port Fiber Modules, 2@ 100Mb Fiber
Magnum 6KQ Managed Field Switch Installation and User Guide (04/07) dependent upon the -48VDC input power to supply the PD power for these RJ-45 (10/100) ports. Each port supplies up to 15watts to power the PoE PD devices. A maximum of 8 PoE ports can be configured in the A and B slots of a 6KQ switch with - 48vdc power input. -
Page 18: Two -Port 10 Mb Mm Fiber St Modules
SFP Gigabit (1000Mbps) port modules The Gigabit port options for the modular slot come in a few different configurations of Fiber SFP’s or RJ-45’s. The Magnum 6KQ offers only SFPs (Small Form Pluggable) for Gigabit speed. There are multiple choices of SFP Gigabit transceiver types to combine with RJ-45’s for the modular slot. -
Page 19: Packet Prioritization, 802.1P Qos
6KQ can do its part to prevent any QOS degradation while it is handling Ethernet traffic through its ports and buffers. The Magnum 6KQ switching hardware supports the IEEE 802.1p standard and fulfills its role in support of QOS, giving packet processing priority to priority tagged packets according to the 802.1p standard. -
Page 20: Managed Network Software (Mns-6K ) For 6Kq-Series
(04/07) load is greatest. When the Magnum 6KQ Switch detects that its free buffer queue space is low, the Switch sends industry standard (full-duplex only) PAUSE packets out to the devices sending it packets to cause “flow control”. This tells the sending devices to temporarily stop sending traffic, which allows the traffic to catch-up without dropping packets. -
Page 21: Features And Benefits
Features and Benefits Managed switching for high performance Ethernet LANs Magnum 6KQ Switches provide unicast non-blocking (all ports can run at full speed at once) performance with standard Managed Network Software (MNS-6K) included. They are typically used in LAN traffic centers with up to 12 100Mb +2 Gigabit ports for backbone connections, where managed network services are desired. -
Page 22: Applications
They provide the flexibility of 100Mbps fiber and copper ports as well as single or dual Gigabit (1000Mb) ports, with industry-standard LAN management software. Magnum 6KQ Switches are easily used in a variety of applications including client/server computing, secure VLAN- performance upgrades to departmental networks, and stream traffic for VOIP and audio/video applications. - Page 23 The different locations can be easily connected together with the Fiber ports supported by the Magnum 6KQ Switch. A main NT-server in a secure area protected from earthquake or fire hazards can be connected to the full duplex Gigabit Fiber port.
- Page 24 Ethernet units. The entire spread network will be manageable to provide easy, detectable, uninterrupted support through a viewable SNMP monitor. The Magnum 6KQ Managed Field Switch equipped with a mix of copper and fiber ports provides an economical and seamless solution to many requirements. The...
-
Page 25: Installation
Magnum 6KQ Managed Field Switch Installation and User Guide (04/07) Example 3. In another application in an industrial environment, a 12 port Nebs compliant, -24VDC managed switch is required to meet the fiber and copper connections to cover the wider area of video CCTV. The switch must be SNMP enabled and managed to easily monitor the whole setup. -
Page 26: Connecting Ethernet Media
For DC power input data, see Appendix B. For Dual Source, see Appendix C The rugged metal case of the Magnum 6KQ will normally protect it from accidental damage in a lab or workplace setting. Maintain an open view of the front to visually monitor the status LEDs. -
Page 27: Connecting Fiber Optic Sc-Type, "Snap-In
3.2.4 Connecting Twisted Pair (CAT3, CAT5, Unshielded or Shielded) The RJ-45 ports of the Magnum 6KQ can be connected to the following two media types: 100BASE-TX and 10BASE-T. CAT 5 cables should be used when making 100BASE-TX connections. When the ports are used as 10BASE-T ports, CAT 3 may be used. -
Page 28: Connecting Twisted Pair (Cat5E Or Better)
& with RJ45 ports used as indicated here. 3.2.5 Connecting Twisted Pair (CAT5e or better, Unshielded or Shielded) The RJ-45 Gigabit ports of the Magnum 6KQ can be connected to the media types, 1000BASE-T or CAT 5E or better 100-ohm UTP or shielded twisted pair (STP) balanced cable. -
Page 29: Gigabit Sfp (Small Form-Factor Pluggable)
Due to its compact, hot pluggable characteristics, SFPs are becoming a very popular choice for various applications. The small-chassis Magnum 6KQ is designed for industry- standard Gb-SFPs and Gb-SFPCU (copper) for user selection of the SFP gigabit media type as desired. - Page 30 Magnum 6KQ Managed Field Switch Installation and User Guide (04/07) The various SFPs transceivers supported by GarrettCom 6KQs D slot are- Module Model# Gigabit Gb Modules, fixed ports--SFP 6KQ-2GSFP 2 SFP 6KQ-2GCU 2 CU 6KQ-2GSFPCU 1SFP, 1CU 6KQ-1GSFP 1 SFP...
-
Page 31: Din-Rail Mounting The Magnum 6Kq
It is available with optional DIN-Rail brackets to mount it securely in a metal factory floor enclosure, maintained vertically for proper convection cooling of the unit. The Magnum 6KQ requires one DIN-Rail mounting clip or latch for secure mounting. These may be ordered as Model # DIN-RAIL-6KQ. See a 6KQ viewed from the side, at the left, with model DIN-RAIL-6KQ in place on the unit. -
Page 32: Mounting Dimensions For 6Kq With Metal Brackets
6KQ can be moved up and out, free of the DIN-Rail mounting. The picture in Section 3.3 shows vertical mounting of Magnum 6KQ as it about to be mounted on a DIN-Rail track for proper convection cooling of the unit. Note that there is air space in the rear, as the 6KQ unit is held out from the rear of the panel by the mounting brackets. -
Page 33: Powering The Magnum 6Kq Managed Field Switch
Magnum 6KQ Managed Field Switch Installation and User Guide (04/07) air circulation and cooling of the rear part of the case. For best cooling of the 6KQ, attach the metal brackets to metal (rather than wood or plastic). Attaching to metal helps conduct heat away from the 6KQ through the metal brackets and into the metal support structure. -
Page 34: 3.5 Alarm Contacts For Monitoring Internal Power, And Software Traps
See the Appendices of this manual for more details. Use an RFQ for other variations. 3.5 Alarm Contacts for monitoring internal power, and Software Traps The Alarm Contacts feature, standard on Magnum 6KQ’s, provides two Form C Normally Closed (NC) contacts to which the user can attach two sets of status monitoring wires at the green terminal block. -
Page 35: 6Kq Port Module (6Kpm) Installation
(04/07) The Alarm Contacts are on the front left area (next to the DC power source) of the Magnum 6KQ unit and are green in color as shown in the picture. 6KQ Port Module (6KPM) Installation Magnum 6KQ Switches are normally received from the factory with all required 6K Port Modules installed. -
Page 36: Operation
Switching Functionality A Magnum 6KQ provides switched connectivity at Ethernet wire-speed among all of its ports. The Magnum 6KQ supports10/100Mbs for copper media and 10 or 100Mb separate traffic domains for fiber ports to maximize bandwidth utilization and network performance. All ports can communicate to all other ports in a Magnum 6KQ, but local traffic on a port will not consume any of the bandwidth on any other port. -
Page 37: Status Leds
Address Learning All Magnum 6KQ units have address table capacities of 4K node addresses suitable for use in larger networks. They are self-learning, so as nodes are added, removed or moved from one segment to another, the 6KQ Switch automatically keeps up with node locations. - Page 38 When Magnum 6KQ RJ-45 copper ports are set for auto-negotiation and are connected to another auto-negotiating device, there are 4 different speed and F/H modes possible depending on what the other device supports.
-
Page 39: Flow-Control, Ieee 802.3X Standard
The Path Delay Value (PDV) bit-times must account for all devices and cable lengths within that domain. For Magnum 6KQ Fast Ethernet switched ports operating at 100Mb half-duplex, the bit time delay is 50BT. - Page 40 Magnum 6KQ Managed Field Switch Installation and User Guide (04/07) Worst case distance = {Worst case OPB, in dB} / [Cable Loss, in dB/Km] µm where the “Cable Loss” for 62.5/125 and 50/125 (M.m) is 2.8 dB/km, and the “Cable Loss” for 100/140 (Multi-mode) is 3.3 dB/km, and the “Cable Loss”...
-
Page 41: Introduction - Magnum 6Kq Managed Field Switch Port Modules35
Refer to Chapter 5 for specific return procedures. 6KPM Module Description An important feature of the Magnum 6KQ is the use of Port Modules for flexible mixed-media connectivity to RJ-45 and fiber media. Since the Magnum 6KQ Switches have dual-speed capability for copper ports, the 1, 2, 3, or 4-port interfaces are designed to support all standard Ethernet media types at 10 or 100 or 1000Mps speed. -
Page 42: 6Kqf-2Mst Combo Module
ST fiber module. The ST- connector functions as a fiber optic Activity transceiver to support 10BASE-FX network segments. When installed in a Magnum 6KQ Managed Switch, the fiber port supports fiber optic cable distances up www GarrettCom com... -
Page 43: 6Kqf-2Msc Fiber Connector
Reach) SC-type connectors. It provides a long reach Fiber function in one module to the 6KQ Switches, supporting 100Mb single-mode (Long-Reach) fiber network segments. The 6KQF-2SSCL, when installed in a Magnum 6KQ Switch, supports single- mode fiber cable lengths of as much... -
Page 44: 6Kq3-Rjmsc "Combo" Connector
The 6KQ3-RJMSC, when installed in a Magnum 6KQ-Field Switch, operates on copper at 100m distances. The Fiber is multi-mode and cable lengths can be as much as 2 Km (see Power Budget, Section 4.5) -
Page 45: 6Kq4-Rjmt, "Combo" Multi-Mode Fx , Mtrj Small-Ff
The 6KQ4-RJMT is equipped with Two 10/100 RJ-45 ports and Two MTRJ fiber ports. When installed in a Magnum 6KQ Switch, it supports the standard distances as per the media. Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED that indicates proper connectivity with the remote device when lit, and a FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). -
Page 46: 6Kq4-Rjmlc Lc Small-Form Factor And
The 6KQ4-RJMLC is equipped with two 10/100 RJ-45 ports and two LC multi-mode fiber ports. When installed in a Magnum 6KQ Switch, it supports the standard distances as per the media. Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED that indicates proper connectivity with the remote device when lit, and a FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). -
Page 47: Poe Power-Pass-Through, Base Unit Model 6Kqp-48Vdc
Magnum 6KQ Managed Field Switch Installation and User Guide (04/07) “10/100” LED indicating 100Mb when lit (or 10 Mbps when off). Note: The 10/100 RJ-45 ports are supported with Auto-negotiation and Auto- crossover (MDIX), which allow the RJ-45 ports to automatically Link with any RJ-45 device and eliminate the use of cross-over cable. -
Page 48: Sfps, Gigabit (1000Mbps) Port Modules
5.2.11 SFPs, Gigabit (1000Mbps) port modules The Magnum 6KQ offers a Gigabit option with multiple choices of copper 10/100/1000Mbps or Gigabit SFP Fiber modules for the modular slot. While up to two Gigabit modules (maxm.) can be configured in the modular slot D only. -
Page 49: 6Kq-Blnk
However, if you are unsure of the procedures described in this section or if the Magnum 6KQ Switch is not performing as expected, do not attempt to repair the unit; instead contact your supplier for assistance or contact GarrettCom Customer Support. -
Page 50: When Calling For Assistance
Testing and repair of product that is not under warranty will result in a customer (user) charge. Shipping and Packaging Information Should you need to ship the unit back to GarrettCom, please follow these instructions: www GarrettCom com... -
Page 51: Appendix A: Warranty Information
GarrettCom. This warranty will not be effective if, in the opinion of GarrettCom, the product has been damaged by misuse, misapplication, or as a result of service or modification other than by GarrettCom. -
Page 52: Appendix B : Dc Power Input
B3.0 APPLICATIONS FOR DC POWERED ETHERNET SWITCHES Magnum 6KQ Switches are easily installed in a variety of applications where - 48VDC, 24, or 125VDC power is used as the primary power source. The DC power configuration capability provides an Ethernet networking solution utilizing a special power supply in switches with a proven track record. - Page 53 125VDC leads) to the DC power terminal block on the Magnum 6KQ Switch. The DC terminal block on the Magnum 6KQ Managed Switch is located on the left front of the unit and is equipped with four (4) screw-down lead posts. The power terminals are identified as positive (+) and negative (-), and they are electrically floating inside the unit so that either may be grounded by the user if desired.
-
Page 54: Appendix C: Internal Dc Dual-Source Power Input Option
Magnum 6KQ -48VDC, 24VDC and 125VDC models with this Dual-Source option are identical to those listed in the Magnum 6KQ Field Switches Installation and User Guide, including Appendix B “Internal DC Power Supply Option”... - Page 55 125VDC power terminal block on the Magnum 6Ks Switch (shown in Figure to the right) The -48VDC terminal block on the Magnum 6KQ Switch is located on the left front of DC terminal the unit next to the Alarm terminal block and is block equipped with five (5) screw-down lead posts.
- Page 56 Magnum 6KQ Managed Field Switch Installation and User Guide (04/07) “+ve potential”. The more “+ve” voltage lead from 48V or –48V supply must be connected to the post labeled “+”. The connection procedure is straightforward. Simply connect the DC leads to the Switch’s power terminals, positive (+) and negative (-) screws.