GarrettCom Magnum 6K16V Installation And User Manual
  1. Manuals
  2. Brands
  3. GarrettCom Manuals
  4. Switch
  5. Magnum 6K16V
  6. Installation and user manual

GarrettCom Magnum 6K16V Installation And User Manual

Managed fiber switch
Hide thumbs Also See for Magnum 6K16V:
Table of Contents

Advertisement

Quick Links

Magnum 6K16V
Managed Fiber Switch
Hardware
Installation and User Guide
www GarrettCom com
.
.
i

Advertisement

Table of Contents
loading

Related Manuals for GarrettCom Magnum 6K16V

Summary of Contents for GarrettCom Magnum 6K16V

  • Page 1 Magnum 6K16V Managed Fiber Switch Hardware Installation and User Guide www GarrettCom com...
  • Page 2 NEBS is a trademark of Telcordia Technologies UL is a registered trademark of Underwriters Laboratories GarrettCom, Magnum and Personal Switch are trademarks and Personal Hub is a registered trademark of GarrettCom, Inc. Important: The Magnum 6K16V Managed Fiber Switch contains no user serviceable parts.
  • Page 3 Magnum 6K16V Managed Fiber Switch Installation and User Guide Contacting GarrettCom, Inc Please use the mailing address, phone and fax numbers and email address listed below: GarrettCom, Inc. Website: http://www.GarrettCom.com email support@garrettcom.com Federal Communications Commission Radio Frequency Interference Statement Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

  • Page 4: Table Of Contents

    2.2.6 Packet Prioritization, 802.1p QOS... 12 2.2.7 Frame Buffering and Flow Control... 12 2.2.8 Managed Network Software ( MNS-6K ) for Magnum 6K16V 13 Features and Benefits... 14 Applications ... 15 Installation... 18 Locating Magnum 6K16V Switches... 18 Connecting Ethernet Media ... 18 3.2.1...
  • Page 5 Magnum 6K16V Managed Fiber Switch Installation and User Guide Introduction - Magnum 6K16V Managed Fiber Switch PM ... 37 Inspecting the Package and Product ... 37 6KPM Module Description... 37 5.2.1 6KP6-RJMST, Combo Module... 38 5.2.1a 6KP6-RJ10ST, Combo Module ... 38 5.2.1b...
  • Page 6 Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) THE MAGNUM LINE Ethernet connectivity products "Designed and Manufactured in the USA" Overview GARRETTCOM, INC. OFFERS THE PREMIUM-QUALITY MAGNUM™ LINE OF ETHERNET LAN CONNECTIVITY PRODUCTS WITH INDUSTRY-STANDARD FUNCTIONALITY AND BUILT-IN FIBER CONFIGURABILITY.
  • Page 7 Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) 8 OR 9-PORT AND 4 OR 5-PORT PERSONAL HUBS, W/ MAN. UP-LINK MEDIA CONVERTERS, 10MB AND 100MB SERIES ALL MEDIA COMBINATIONS, INCL. FIBER ST, SC, MM., SINGLE MODE THE “X-LINE” OF CONFIGURABLE MIXED MEDIA PRODUCTS:...

  • Page 8: Specifications

    Magnum 6K16V Managed Fiber Switch SPECIFICATIONS Technical Specifications Performance Filtering / Forwarding Rate: Ethernet:14,880 pps Fast Ethernet: 148,800 pps Gigabit Ethernet: 1, 488,000 pps Switching Processing Type: Store and Forward with IEEE 802.3x full- duplex flow -control, non-blocking Data Rate: 10Mbps,100Mbps and 1000Mbps...
  • Page 9 Magnum 6K16V Managed Fiber Switch Fiber Single-mode connector types: Fiber Port, SC-type: Fiber optic single-mode, 100BASE-FX Fiber Port, LC-type Fiber Port, 1000BASE-FX, GBIC modules LEDs: Per Port (one set at the port, one set in top or front) LK: Steady ON when media link is operational...
  • Page 10 Magnum 6K16V Managed Fiber Switch For DC internal power supplies at –48VDC, 24VDC and 125VDC, including Dual Source options ( DC input sources are interrupted) Per-port jumpers and switches The copper daughter board has on internal switch for selecting MDI-MDIX crossover on port # 1.

  • Page 11: Ordering Information

    Magnum 6K16V-Magnum 6K16V Managed Fiber Switch, base unit for vertical mounting May be configured with a selection of 10/100/1000 6K16V fiber and copper port connector types, 16 total ports max. Two metal brackets for vertical wall or panel mounting. Wire speed filtering and forwarding across all ports, 802.3x flow control, 802.1p priority packet processing, self-learning 4K-node address table, large 240KB...
  • Page 12 Set of two DIN-Rail holders for a secure vertical mount of a 6K16V DIN-RAIL-VRM unit, with screws to attach to metal mounting brackets and to the 6K16V case. GarrettCom, Inc. reserves the right to change specifications, performance characteristics and/or model offerings without notice.

  • Page 13: Introduction

    Inspect the contents of this package for any signs of damage and ensure that the items listed below are included. This package should contain: Magnum 6K16V Managed Fiber Switch, base unit (configured with user-selected port module options installed) AC Power Cord (U.S. and other 115 VAC only)

  • Page 14: Product Description - Magnum 6K16V Managed Fiber Switch

    Designed for use in transportation and traffic control systems, power utilities, industrial factory-floor jobs, and video surveillance systems with segments requiring Gigabit backbone interconnections, the Magnum 6K16V is easy to install and operate. The next generation of industrial applications will need advanced managed network software, operation at extended temperatures, fiber ports modularity, support for self- healing ring structures, and gigabit backbone configurability.

  • Page 15: Eight-Port Sff Fiber Modules (6K8-Mtrj, 6K8-Mlc)

    The 100Mb fiber eight-port modules for the Magnum 6K16V’s normally are set (factory default) to operate in full-duplex mode for best fiber distance and performance. Using the 6K16V’s MNS software, the user may select full- or half-duplex mode per-port through set-up of the software (See Magnum 6K16V MNS Software Manual) for the flexibility to adapt to any FDX or HDX type of Fast Ethernet devices).

  • Page 16: Eight-Port Copper Module, 6K8-Rj45

    ON (indicating there is a powered-up device at the other end of the cable) in order for a LK LED to provide valid indications of operating conditions on that port. Using the 6K16V’s MNS software, the user may disable auto-negotiation and fix the desired operation of each RJ-45 port. MNS Software set-up may select 10Mb or 100Mb speed and full- or half-duplex mode per-port as per user requirement.
  • Page 17 Magnum 6K16V Managed Fiber Switch available as four 10/100 switched RJ-45 copper ports and two 100Mb switched multi- mode fiber ST, SC or single mode SC or Long Reach SC ports. For ports numbering, ports 1,3,5,7 are copper, ports 2 and 6 are fiber, ports 4 and 8 are not present.

  • Page 18: Four-Port 10 Mb And 100Mb Mm Fiber St Modules

    The default setup on the 10Mb fiber module is half-duplex, which allows the Magnum 6K16V Switch to connect to any 10Mb hub or media converter or almost any other device with a 10Mb fiber Ethernet port. The default setting of the 100Mb module is full duplex.

  • Page 19: Packet Prioritization, 802.1P Qos

    Quality of Service means providing consistent predictable data delivery to users from datagram paths that go all across a network. As a LAN device, the Magnum 6K16V can do its part to prevent any QOS degradation while it is handling Ethernet traffic through its ports and buffers.

  • Page 20: Managed Network Software ( Mns-6K ) For Magnum 6K16V

    Magnum 6K16V Managed Fiber Switch load is greatest. When the Magnum 6K16V Switch detects that its free buffer queue space is low, the Switch sends industry standard (full-duplex only) PAUSE packets out to the devices sending packets to cause “flow control”. This tells the sending devices to temporarily stop sending traffic, which allows a traffic catch-up to occur without dropping packets.

  • Page 21: Features And Benefits

    Features and Benefits Managed switching for high performance Ethernet LANs Magnum 6K16V Switches provide non-blocking (all ports can run at full speed at once) performance with standard Managed Networks Software (MNS-6K) included. They are typically used in LAN traffic centers with 16 100Mb or 8+2 Gigabit ports for backbone connections, where managed network services are desired.

  • Page 22: Applications

    6K16V Switches enables them to inter-connect a series of subnets (one subnet per 6K16V Switch port) in a LAN traffic center. The subnet connections may be via fiber or twisted pair cabling, 100Mbps or 10 Mbps speed, and full-or half- duplex.
  • Page 23 Gigabit Fiber port. Extended temp. ratings and wide options of AC/DC power supply qualifies this managed 6K16V switch to use in temp. controlled network floor and many others temp sensitive critical Industrial applications, where above normal room temp. is required to operate the network.
  • Page 24 SNMP monitor. The Magnum 6K16V Managed Fiber Switch equipped with the mix of copper and fiber ports provides an economical and seamless solution to the requirements. The...

  • Page 25: Installation

    The 6K16V has no fans, so it is silent when in operation. Internal electronics use the case as a heat sink, so the unit may normally be quite warm to the touch.

  • Page 26: Connecting Fiber Optic St-Type, "Twist-Lock

    Connecting Fiber Optic ST-type, “twist-lock” The following procedure applies to installations using a PM with ST-type fiber connectors. This procedure applies to ports using a 6K16V module, MST-type port. Before connecting the fiber optic cable, remove the protective dust caps from the tips of the connectors on the PM.

  • Page 27: Connecting Twisted Pair (Rj-45,Cat3, Cat5,)

    3.2.4 Connecting Twisted Pair (RJ-45,CAT3, CAT5, Unshielded or Shielded) The RJ-45 ports of the Magnum 6K16V can be connected to the following two media types: 100BASE-TX and 10BASE-T. CAT 5 cables should be used when making 100BASE-TX connections. When the ports are used as 10BASE-T ports, CAT 3 may be used.

  • Page 28: Connecting Gigabit Media Using Gbics

    To install the 6K16V with the DIN-Rail brackets and latches attached to it, hold the 6K16V in the vertical position with the bottom out, and with the top moved in toward the DIN-Rail. Position the latches over the top of the DIN-Rail. Then, snap the latches...

  • Page 29: Mounting Dimensions For 6K16V With Metal Brackets

    Once the bottom of the 6K16V is rotated out, the DIN-Rail latch is not engaged and the 6K16V can be moved up and out, free of the DIN-Rail mounting.. The picture below is a front / right-side view of a DIN-Rail mounted 6K16V. It shows vertical mounting of Magnum 6K16V on a DIN-Rail track for proper convection cooling of the unit.

  • Page 30: Powering The Magnum 6K16V Managed Fiber Switch

    Magnum 6K16V Managed Fiber Switch Note that the back of the 6K16V unit is held out from the panel or wall behind it, creating a rear space of about ¼ inch or 1cm. This allows air circulation and cooling of the rear part of the case.

  • Page 31: 3.5 Alarm Contacts For Monitoring Internal Power, And Software Traps

    Magnum 6K16V Managed Fiber Switch to the unit. Power supply options are available to suit the 6K16V Switches to special high- availability communications and/or heavy industrial-grade applications, including: * -48VDC, 24VDC and 125VDC with single DC input, * -48VDC, 24VDC and 125VDC with dual-source DC input, See the Appendices of this manual for more details.

  • Page 32: 6K16V Port Module (6Kpm) Installation

    Magnum 6K16V Managed Fiber Switch 6K16V Port Module (6KPM) Installation Note: the modules used in the 6K16V vertical mount unit are similar to those used in rack-mount 6K units, except that the top LEDs are positioned for front viewing for the vertical-mount 6K16V model. The modules have the letter”V” in the model numbers, but otherwise are the same.
  • Page 33 When the chassis top cover has been removed, the interior of the unit is exposed. Looking down into the Magnum 6K16V unit, notice that there are individual PM installation spaces and female latch (white) connectors provided on the main board along with four stand-off’s for each 6KPM card position.

  • Page 34: Installing 6Kpm Cards In The Magnum 6K16V

    Placed Granddaughter board (as shown in fig. 3.6.2a and 3.6.2b) on the chassis Step 2. built in stand off (female) provided at the front of the 6K16V Main Board and screw down tightly with the three 5/16 stand-off (male) on the top of the Granddaughter board The 5/16 stand off has been used to place the daughter board on the top of the granddaughter board and latch it securely.
  • Page 35 Magnum 6K16V Managed Fiber Switch Fig 3.6.2b Granddaughter Board placed in slot A and secured with three 5/16 stand- off’s Step 3. The figure here illustrates the basic layout of an individual PM card. Each Hold the daughter board with both hands at the end and align the two cream Step 4.
  • Page 36 Figure 3.6.2f: Securely latching up 6KPM Cards into a Magnum 6K16V NOTE: All 6KPM slots need not be filled in order for the Magnum 6K16V unit to be operational. When leaving 6KPM slots empty, always use a face plate (Magnum 6K8- BLNK) to cover the slot opening in the front panel.

  • Page 37: Removing 6Kpm Cards

    Make sure the chassis cover is aligned properly before securing the enclosure. 3.6.3 Removing 6KPM Cards To properly remove a 6KPM card from the 6K16V Managed Fiber Switch, follow the 3 steps below. Step 1. Remove chassis cover Caution: Be sure the power cord is unplugged.

  • Page 38: Connecting A Management Console Terminal To Magnum 6K16V

    Use a DB-9 “null modem” cable (use on any serial port)or “one DB-9 and one USB” ( USB port on the laptop) null modem cable to connect the Magnum6K16V Console Port (the RS-232 port on the 6K16V Switch) to the your PC, so that your PC becomes the 6K16V’s Console Terminal.

  • Page 39: Operation

    10 or 100Mb separate traffic domains for fiber ports to maximize bandwidth utilization and network performance. All ports can communicate to all other ports in a Magnum 6K16V, but local traffic on a port will not consume any of the bandwidth on any other port.

  • Page 40: Status Leds

    MNS Software for each RJ-45 port separately. For detail information see Section 8 (Optimizing Port usage) of Magnum 6K16V Software user guide (MNS) . See Section (2.2.9 at page no.13) of this manual to access the “6K16V Software userguide”...
  • Page 41 If the device at the other end is not an auto-negotiating device, the 6K16V’s RJ-45 ports will try to detect its idle signal to determine 10 or 100 speed, and will default to half- duplex at that speed per the IEEE standard.

  • Page 42: Flow-Control, Ieee 802.3X Standard

    The transmitting device is commanded to stop transmitting into the 6K16V Switch port for sufficient time to let the Switch reduce the buffer space used. When the available free- buffer queue increases, the Switch will send a “RESUME"...
  • Page 43 Magnum 6K16V Managed Fiber Switch Fiber Speed, Port Mode Std. Module 6KP4V- 10Mb Multi- Mode F10ST 6KPV- 100Mb Multi- mode MST, MSC 100Mb Single- 6KPV-SSC mode 100Mb Single- 6KPV- mode SSCL 100Mb Multi- 6KPV- mode MTRJ 100Mb Multi- 6KPV- mode...

  • Page 44: Introduction - Magnum 6K16V Managed Fiber Switch Pm

    Magnum 6K16V Switches have dual-speed capability for copper ports, the 6 or 8-port interfaces are designed to support all standard Ethernet media types at 10 or 100Mps speed. Each 6K16V PM provides six or eight ports for connecting Ethernet segments with its individual connector type and media.

  • Page 45: 6Kp6-Rjmst, Combo Module

    100Mb combo module with the exception of 10Mb speed at the ST fiber module. The ST-connector functions as a fiber optic transceiver to support 10BASE-FX network segments. When installed in a Magnum 6K16V Managed Switch, the copper port supports the standard distance 100m on each port and the fiber port supports fiber optic cable distances up the IEEE-standard 10Mbps distance limits, i.e., typically 2km at full-...

  • Page 46: 1C 6Kp4-Flstfx, 2 Module

    100Mb fiber. The 10Mb ST-fiber ports allow the user to connect their legacy 10Mb network to the Magnum 6K16V switch. They also provide a convenient way for the half duplex hub to connect to the switch through 10Mb fiber ports. Whereas the 100Mb ST...

  • Page 47: 6Kp6-Rjmsc

    6K16V Switch supporting four Copper and two single-mode fiber network segments. The 6KP6-RJSSC, when installed in a Magnum 6K16V Switch operates on copper at the 100m distance. The Fiber is single-mode and cable lengths can be as much...

  • Page 48: 6Kp6-Rjsscl "Snap-In" Connector

    The Magnum 6KP6-RJSSC is also a Combo module equipped with 4 dual speed copper ports and 2 Single-mode (Long Reach) SC-type connectors. It provides a combination of copper and Fiber functions in one module to the 6K16V Switches, supporting four Copper and two single-mode (Long-Reach) fiber network segments.

  • Page 49: 6Kp8-Mtrj

    100Mb full-duplex, whereas the bottom two ports multi-mode ST-Fiber support 10Mb half-duplex. This combo module provides more flexibility to the user to connect their legacy 10Mb fiber as well as 100Mb to the Magnum 6K16V Switch. When installed in a Magnum 6K16V Switch, the 100Mb MTRJ connector supports fiber optic cable distances up to the IEEE-standard 100Mbps distance limits, i.e., typically 2km at full-duplex and 412m at half-duplex.

  • Page 50: 6Kp8-45Mt

    The 6KP8-45MT is equipped with 4 10/100 RJ-45 ports and 4 MTRJ fiber ports. When installed in a Magnum 6K16V Switch, it supports the standard distances as mentioned on 5.2.3. and the LEDs also act similarly. 5.2.7...

  • Page 51: 6Kp8-45Lc, Combo Connector

    Magnum 6K16V Managed Fiber Switch the remote device when lit, and a FDX/HDX LED indicating full-duplex mode when lit (or half-duplex when off). 5.2.8 6KP8-45LC, Combo 4@ 100Mbps multi-mode -LC small-form factor and 4@ 10/100 Mbps RJ-45 Connector The Magnum 6KP8-45LC Module is a combo module with a combination of copper and Fiber (Small Form Factor) LC type ports.

  • Page 52: 6Kp8-45-2Mt, Mtrj Small-Form-Factor

    The 6KP8-45-2MT is equipped with six 10/100 RJ-45 ports and two 100Mb MTRJ fiber ports. When installed in a Magnum 6K16V Switch, it supports the standard distances as mentioned on 5.2.3. and the LEDs also act similarly. www GarrettCom com...

  • Page 53: 10A 6Kp8-45-2Lc, Lc Small-Form-Factor

    Magnum 6K16V Managed Fiber Switch 5.2.10a 6KP8-45-2LC, 6@ 10/100Mbps RJ-45 and 2@100Mb single-mode FX , LC Small-Form-Factor The Magnum 6KP8-45SLC eight port Module is a combo module with copper and fiber (Small Form Factor) LC type fiber ports. The small size of LC connectors give an advantage of placing more ports on one module.

  • Page 54: Gbic-Lxsc Gigabit Fiber (1000Mb), Mm Sc Connector

    LED indicating proper connectivity with the remote device when lit. 5.2.12 6KM-BLNK The 6K8-BLNK is a blank face plate or cover plate that must be installed in any empty 6K16V PM slot to maintain proper cooling air flow, safety, etc. Two screws underneath the front panel hold the 6KM-BLNK in place.

  • Page 55: Troubleshooting

    However, if you are unsure of the procedures described in this section or if the Magnum 6K16V Switch is not performing as expected, do not attempt to repair the unit; instead contact your supplier for assistance or contact GarrettCom Customer Support.

  • Page 56: When Calling For Assistance

    The components involved in the problem; d. Any particular application that, when used, appears to create the problem; An accurate list of GarrettCom product model(s) involved, with serial number(s). Include the date(s) that you purchased the products from your supplier.

  • Page 57: Shipping And Packaging Information

    Testing and repair of product that is not under warranty will result in a customer (user) charge. Shipping and Packaging Information Should you need to ship the unit back to GarrettCom, please follow these instructions: Package the unit carefully. It is recommended that you use the original container if available.

  • Page 58: Appendix B : Internal Dc Power Supply Options

    APPENDIX B : Internal DC Power Supply Options B1.0 SPECIFICATIONS FOR MAGNUM 6K16V SWITCHES, DC POWER Power Magnum 6K16V models, for –48V and 24V DC & 125VDC and 5V Power input Each Magnum Model 6K16V Managed Switch (DC option) requires a DC power source, from for 24VDC, -48VDC and 125VDC option or 5VDC input.
  • Page 59 24VDC/125VDC/5VDC leads) to the DC power terminal block on the Magnum 6K16V Switch. The DC terminal block on the Magnum 6K16V Managed Switch is located on the left front of the unit and is equipped with three (3) screw-down lead posts. The power terminals are identified as positive (+) and negative (-), and they are floating inside the unit so that either may be grounded by the user if desired.
  • Page 60 When power is applied, the green PWR LED will illuminate. Note: The GND should be hooked up first. The 6K16V unit has a floating ground, so the user may elect to Ground either + or = terminal to suit the customer’s use.

  • Page 61: Appendix C: Internal Dc Dual-Source Power Option

    Magnum 6K16V -48VDC, 24VDC and 125VDC models with this Dual-Source option are identical to those listed in the Magnum 6K16V Fiber Switches Installation and User Guide, including Appendix B “Internal DC Power Supply Option”...
  • Page 62 Terminal Block on a Magnum 48VDC with Dual-Source option Note: The GND should be hooked up first. The 6K16V unit has a floating ground, so the user may elect to Ground either + or = terminal to suit the customer’s use.
  • Page 63 Magnum 6K16V Managed Fiber Switch C5.1 UL Requirements The following must be adhered to in order to conform to UL requirements: Minimum 18 AWG cable for connection to a Centralized DC power source. Minimum 14 AWG cable for connection to earthing wiring.

Table of Contents