Table of Contents
Advertisement
Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (07/10)
the Switch devices. It supports distances according to the 10Base-FL standard i.e, 2Km
distance for multi-mode fiber. (Single-mode for 10Km distance may be available as a
special order).
Each port has an Activity (ACT) LED indicating packets being received, a
Link (LK) LED indicating proper connectivity with the remote device when lit, and
FDX/HDX LED indicating full-duplex mode when lit (or half-duplex if off).
5.2.2
6KP6-RJMSC 4@10/100Mbps RJ-45 and 2@100Mb multi-mode
FX-SC "snap-in" Fiber connector
The Magnum 6KP6-
RJMSC is also a Combo 6 Port
module equipped with 4 10/100Mb
RJ-45 ports along with 2 multi-
mode 100Mbps fiber optic
transceivers all in one module. This
is similar to the 6KP6-RJMST. It
has the same LEDs indicating port
activity (ACT), Link (LK), and
FDX / HDX and 10/100 operation,
and the same face-plate lettering.
While the functionality of these two modules is essentially the same, the 6KP6-
RJMSC is equipped with an SC-type "snap-in" connector instead of an ST-type.
5.2.3
6KP6-RJSSC 4@ 10/100Mbps RJ-45 Ports and 2@100Mbps
single-mode FX-SC-type, "snap-in" connector
The Magnum 6KP6-
RJSSC is also a Combo module
equipped with 4 dual speed copper
ports and 2 Single-mode SC-type
connectors. It provides an
advantage through combining
copper and Fiber functions in one
module of the 6K32F Series Switch
supporting four Copper and two
single-mode fiber network
segments.
www GarrettCom com
.
.
50
Advertisement
Table of Contents
