Table of Contents
Advertisement
Magnum 6K8-Series Industrial Field Switch
feature eliminates the need for a special twisted pair crossover cable when connecting to
a hub or another switch.
Each port has an Activity (ACT) LED indicating packets being received, a
Link (LK) LED that indicates proper connectivity with the remote device when lit, a
FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off), and a
"10/100" LED indicating 100Mb when lit (or 10 Mbps when off).
Important Note: The 10/100 RJ-45 ports are supported with Auto-negotiation and
Auto-crossover (MDIX), which allow the RJ-45 ports to automatically Link with any RJ-
45 device and eliminate the use of cross-over cable.
5.2.10
6KP8-45-2MT, 6@ 10/100Mbps RJ-45 and 2@100Mb multi-mode
FX , MTRJ Small-Form-Factor
The Magnum 6KP8-
45-2MT eight port Module is a
combo module with copper and
fiber (Small Form Factor)
MTRJ type ports. The small
sizes of MTRJ connectors give
an advantage of placing more
fiber ports on one module. The
6KP8-45-2MT is equipped with
six 10/100 RJ-45 ports and two
100Mb MTRJ fiber ports. When installed in a Magnum 6K8-Series Switch, it supports
the standard distances as mentioned on 5.2.3. and the LEDs also act similarly.
5.2.10a 6KP8-45-2LC, 6@ 10/100Mbps RJ-45 and 2@100Mb single-mode
FX , LC Small-Form-Factor
The Magnum 6KP8-45SLC eight port Module is a combo module with copper
and fiber (Small Form Factor) LC type fiber ports.
www GarrettCom com
.
4
.
Installation and User Guide 03/06)
6KP8-45-2MT
6KP8V -
6 Port@10/10Mbps
Multi-Mode Fiber port
2
1
3
10/10
F/H
10/100
F/H
2
4
1
LINK
3
ACTIVITY
53
& 2 port @100Mb
5
L
AC
ACT
F/H
ACT
F/H
LK
6
2
10/100
4
FULL/HALF
1
3
Advertisement
Table of Contents
