GarrettCom Magnum 6K8-Series Hardware Installation And User's Manual page 40

Magnum 6K8-Series Industrial Field Switch
Figure below 3.6.2c, screw down tightly with the three 5/16 stand-off (male) on the top
of the Granddaughter board. The three 5/16 stand off has been used to place the daughter
board on the top of the granddaughter board and a latch connector to hold it securely.
Fig 3.6.2b Granddaughter
Board shown separately
Fig 3.6.2c Granddaughter Board placed in slot & secured with three 5/16 standoff's
Step 3. The figure here illustrates the basic layout of an individual PM card. Each
6KPM card fits into the space provided on the main board.
end and insert the 6KPMV module inside the front face plate slot carefully. Then align
the two cream color latching connectors (male) placed at the bottom of the daughter
board with the other female connector placed on the Granddaughter and main board. As
shown below in Fig. 3.6.2f.
www GarrettCom com .
Fig. 3.6.2d Daughter Board, top view of
4 copper 10/100 ports
Fig 3.6.2e Daughter Board shown upside down with two
male latch connectors
Step 4.
.
Installation and User Guide 03/06)
Hold the daughter board with both hands at the
35
Female latch connector
Fig. 3.6.2f Magnum 6KPM
daughter board aligned
with the bottom latch
connector after inserted
properly in front plate slot