Printer Connected Via Usb Connection - HID Fargo DTC1250 User Manual

DTC1250e/DTC1000Me/DTC4250e Card Printer User Guide, PLT-01668, 1.0
Step Procedure
3 Open a Web Browser.
Type the IP Address followed by /SwiftID.html to access the Swift ID badging application.
•
•
3.1.3

Printer Connected Via USB Connection

Perform this procedure on the initial setup of a printer when connecting Swift ID via USB.
Note: This application is not intended for use with multiple printers.
To start using Swift ID via a USB connection with a DTC1250E or DTC4250E that has already been
installed on the PC, select Option 1 or 2 and complete the procedure.
Step Procedure
1 Follow the on-screen instructions during the Printer Driver installation process to install all
the required components to access Swift ID via a USB connection.
Note: The HID EEM Driver installs. A shortcut appears on the desktop, which allows you
to easily launch the application.
3.1.3.1 Option 1
Step Procedure
1 Uninstall the printer driver, reinstall the printer driver and check the Enable Swift ID over
a USB connection check box.
Page 28
For example: 10.244.69.70/SwiftID.html
The Getting Started with Swift ID... page displays.
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
October 2013