Safety Messages (Review Carefully) - HID Fargo DTC1250 User Manual

DTC1250e/DTC1000Me/DTC4250e Card Printer User Guide, PLT-01668, 1.0
1.2

Safety Messages (Review Carefully)

Critical Instructions for Safety purposes
Symbol
Failure to follow these guidelines results in personal injury or death.
To prevent personal injury or death:
This device is electro statically sensitive. You may damage the device if exposing
it to static electricity discharges.
To prevent damage:
This symbol warns of an electrical hazard that could result in personal injury or
death.
For safety purposes, do not use Ethernet for a direct connection outside of the
building.
Page 8
• Reference the following safety messages before performing an operation.
• Always remove the power cord prior to performing repair procedures, unless
otherwise specified.
• Ensure only qualified personnel perform these procedures.
• Reference the following safety messages before performing an operation.
• Observe all established Electrostatic Discharge (ESD) procedures while
handling cables in or near the Circuit Board and Printhead Assemblies.
• Always wear an appropriate personal grounding device.
• Always remove the Ribbon and Cards from the Printer before making any
repairs, unless otherwise specified.
• Remove jewelry and thoroughly clean hands before working on the Printer.
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
October 2013