HID Fargo DTC1250 User Manual page 43

Setting
OLED Contrast
(display contrast)
Ribbon Calibrate Blue
Cleaning Rate
Mag HI-Co Voltage Offset
Mag Lo-Co Voltage Offset
Ribbon Green LED Level
Ribbon Blue LED Level
Erase Heat Offset
Write Heat Offset
October 2013
DTC1250e/DTC1000Me/DTC4250e Card Printer User Guide, PLT-01668, 1.0
Description
Use this option to increase or decrease the contrast of the printer
OLED (if applicable).
This setting is a calibration driven value and should not be
adjusted.
It is factory set and should not be changed unless directed by a
technician.
Use this option to adjust the number of cards printed before the
Printer displays a message indicating cleaning is needed.
•
The default value is 3000 cards.
This setting is a calibration driven value and should not be
adjusted.
It is factory set and should not be changed unless directed by a
technician.
This setting is a calibration driven value and should not be
adjusted.
It is factory set and should not be changed unless directed by a
technician.
This setting is a calibration driven value and should not be
adjusted.
It is factory set and should not be changed unless directed by a
technician.
This setting is a calibration driven value and should not be
adjusted.
It is factory set and should not be changed unless directed by a
technician.
Adjust the Erase temperature for the rewriteable cards as needed.
Increase the Current Setting to cause more heat to be used in the
erasing process.
OR
Decrease the Current Setting to cause less heat to be used in the
erasing process.
Note: Erase Heat Offset provides user ability to control the
Printhead heat level when the Erase Operation is performed.
Appropriate heat levels should be applied for the proper erase
process. This setting should be adjusted for proper erasure.
Adjust the Write temperature for the rewriteable cards as needed.
Increase the Current Setting to cause more heat to be used in the
printing process of a rewritable card.
OR
Decrease the Current Setting to cause less heat to be used in the
printing process of a rewritable card.
Note: Write Heat Offset provides user capability to control the
printhead heat level when the Write Operation is performed.
Appropriate heat levels should be applied for the proper writing
process.
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Page 43