4.12.2 Overlay / Print Area
The Overlay / Print Area box includes several options:
•
Defined Area – To define multiple areas, increase the count in the Defined Area field and repeat the
overlay or print area definition steps (above).
•
For Print and Overlay – This option applies the defined area to both the print and overlay processes.
For Overlay Only – The defined are applies only to the overlay process. The entire card prints and
•
only the overlay is affected.
•
For Print Only (No Overlay) – The defined are applies only to the print process. Overlay is disabled.
4.12.3 Security Options
The Security Options area includes the following options:
•
Visual Security Solutions – Use this field to enable and select a visual security option. When one of
the options is selected, the Overlay/Print Area feature is disabled.
This field presents options based on the orientation of the card in the template. The default value for all
cards is No Visual Security. Landscape designs offer:
o
A – Upper Left
o
B – Upper Right
o
C – Lower Left
o
D – Lower Right
•
Portrait designs offer:
o
E – Upper Left
o
F – Upper Right
o
G – Lower Left
•
HoloMark – Use this option for hologram security.
October 2013
DTC1250e/DTC1000Me/DTC4250e Card Printer User Guide, PLT-01668, 1.0
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Page 61