Displaying The Outside Party's Name; Performing A "Hookflash" During A Call; Placing Calls On Hold - Inter-Tel AXXESS 550.8109 Manual

Displaying The Outside Party's Name

When you enter the following feature code, while connected to an outside call with
Caller ID, the display will switch between the caller's name and number. If there is no
outside party name available, the display shows "CANNOT ACCESS FEATURE."
To show the outside party's name:
— Press

Performing A "Hookflash" During A Call

A timed hookflash (a quick hang up and release) may be required for certain tele-
phone company services. This feature code sends a hookflash over the outside line.
To generate a hookflash while using a line:
— While on a call, press
P C
LACING ALLS
There are two ways to place a call on hold. The first procedure places a call on indi-
vidual hold, the second places it on system hold.
•
Individual Hold places the call on hold at one phone. It can then be directly
picked up at that phone or it can be picked up at another phone using the reverse
transfer (call pick-up) feature.
•
An outside call on System Hold can be picked up directly at any keyset that
shows a flashing key for the call, including the keyset that placed it on hold.
(Intercom calls cannot be placed on system hold.)
To place a call on Individual Hold:
— Press
— Hang up OR place another call.
— To return to the call, lift the handset and press the flashing key.
To place an outside call on System Hold:
— Press
— Hang up OR place another call.
— To return to a call on system hold at any keyset with a flashing key, lift the hand-
set and press the flashing key.
To pick up (reverse transfer) a call that is holding at another phone:
— Lift the handset and dial
— Dial the extension number where the call is holding.
AXXESS Standard and Basic Keyset and AXXESSORY Talk Guide
∞
and dial .
3 7 9
∞
and dial
O H
N OLD
.
HOLD
∞
and dial
5
3 3
.
4
.
3 3 0
.
13