Placing Calls On Hold; Placing Conference Calls - Inter-Tel 8690 User Manual

P C
LACING ALLS
Your endpoint allows you to place up to two calls on hold.
To place a call on Hold:
Press
1.
Hang up or place another call.
2.
To return to a call that is on hold:
Lift the handset and press
P C
LACING ONFERENCE
With the Conference feature, you can establish a conference call with a total of three
intercom and/or outside parties.
To place a conference call:
While on the first call, press
1.
Place another intercom or outside call.
2.
Press
3.
During the conference call, you can do the following:
•
To place the conference on hold: Press
without disconnecting the parties. To return to the conference, press
•
To drop out of the conference: Hang up. This removes your endpoint from the
conference, but leaves the other parties connected.
•
To mute your microphone: Press
during the conference. If mute is enabled, you can hear the conferenced parties,
but they cannot hear you.
46
O H
N OLD
.
Hold
.
Hold
C
ALLS
, and then
3 4
, and then
3 4 5
to connect the second call to the conference.
5
. This places the conference on hold
Hold
. This turns your microphone on or off
Mute
®
Inter-Tel Model 8690 User Guide (SIP Mode)
to put the call on hold.
.
Hold