Fax Destination - Inter-Tel AXXESS 550.8109 Manual

— A prompt tells you what the cascade's current status is. Perform one of the fol-
lowing steps.
•
To program a cascade level: Press
wish to program (1-9). You then have the following options:
— To enable or disable the cascade level: Press
— To set up or change an extension or telephone number: Press
— To set up or change a pager number: Press
•
To set up time of day for notification: Press
want the message notification start and stop. Enter the times with two digits
for the hour and two digits for the minutes. If entering the time in 12-hour
format, you will be prompted to press
Note
ing times to be the same.
•
To set up the days of the week for notification: Press
of the following: Press
select individual days. If you selected individual days, you will be prompted
to press digits 1-7 which correspond to the days Sunday through Saturday.
•
To select all or priority-only message notification: Press
1
— The list of options returns. Either select another option, as described above, or
press

Fax Destination

To change your Fax Destination Number:
— Enter your mailbox as described on
Options Menu.
— Press
— Enter the number of your fax destination, followed by
— To accept press
46
level until a notification number is programmed.)
press if it is an extension number OR press
1
number. Then enter the number.
If you wish to have 24-hour notification, program the starting and end-
for all messages or
2
to save the settings and exit.
#
for More Options and then press
9
. Or, to erase the number and re-enter it press
#
AXXESS Standard and Basic Keyset and AXXESSORY Talk Guide
and enter the number of the level you
1
3
2
for AM or press
1
for Monday-Friday,
1
for priority messages only.
page 38. Then press
.
1
. (You cannot enable the
1
. Then
2
if it is an outside
2
. Then enter the number.
. Then enter the time you
for PM.
2
. Then select one
3
for all days, or
2 3
. Then press
4
to select the Personal
4
.
#
.
3
to