Enabling Use Of Radius Assigned Vlans; Showing Eapol Multihost Interface; Showing Vlan Config Control - Avaya 4000 Series Troubleshooting Instructions

Troubleshooting authentication

Enabling use of RADIUS assigned VLANs

About this task
Change the "allow RADIUS assigned VLAN" setting to "enable".
Procedure
1. Use the eapol multihost use-radius-assigned-vlan command to allow
2. Ensure that there are no errors after execution.

Showing EAPOL multihost interface

About this task
Display the EAPOL interface information.
Procedure
1. Use the show eapol multihost interface <port#> command to display
2. Note the status of ALLOW RADIUS VLANs.

Showing VLAN config control

About this task
Display the VLAN config control information.
Procedure
1. Use the show vlan config control command to display information.
2. Identify if the config control is set to strict.
138 Troubleshooting Avaya ERS 4000 Series
the use of VLAN IDs assigned by RADIUS.
the interface information.
Comments? infodev@avaya.com
April 2014