Chapter 2: New In This Release; Features; Vlacp Flap Detect And Damping; Dynamic Vlan Addition To Lacp-Enabled Mlt (Lag) - Avaya 8600 Configuration Manual

Chapter 2: New in this release

See the following sections for the changes in Avaya Ethernet Routing Switch 8800/8600 Configuration —
Link Aggregation, MLT, and SMLT, NN46205-518 for Release 7.1.3.
•

Features

on page 9
•

Other changes

on page 9
Features
See the following sections for feature updates to this document in release 7.1.3.

VLACP flap detect and damping

VLACP flap detect and damping is used to automatically shut down selected VLACP links that
are flapping due to link instability.
For more information, see
VLACP flap detect and damping

Dynamic VLAN addition to LACP-enabled MLT (LAG)

Starting in Release 7.1.3, you can add or remove a VLAN from an active LACP-enabled MLT
without first disabling LACP on the MLT. For more information, see
configuration considerations
Other changes
There are no other changes in this release.
Configuration — Link Aggregation, MLT, and SMLT
on page 47
on page 50
MLT with LACP
January 2012 9