Copper Gbic Transceiver Installation Notes - Avaya C360 Installation And Configuration Manual

Table 8: Gigabit Fiber Optic Cabling 2 of 2
Gigabit
Interface
1000BASE-LX
1000BASE-ELX

Copper GBIC Transceiver Installation Notes

Before installing a copper SFP transceiver, ensure that auto-negotiation is enabled for the
transceiver ports. You should also ensure that the auto-negotiation is enabled for the port at the
other end of the link:
1. Use the show port command to check the auto-negotiation status of the transceiver ports.
2. Use the set port negotiation <module>/<port> enable command to enable
auto-negotiation if necessary.
Fiber Diameter Modal
Type (µm) Bandwidth
(MhzKm)
SM 9
SM 9
Installing SFP GBIC Transceivers
Maximum Minimum
Distance Distance
(m) (m)
N/A 10,000
N/A 70,000
Wavelength
(nm)
2 1,310
10,000 1,550
2 of 2
Issue 1 July 2006 47