Sfp+ Transceiver Specifications - Avaya 8800 Series Installation Manual

SFP+ transceiver specifications

The following sections provide specifications for supported SFP+ transceivers:
• 10GBASE-SR/SW SFP+ specifications
• 10GBASE-LRM SFP+ specifications
• 10GBASE-LR/LW SFP+ specifications
• 10GBASE-ER/EW SFP+ specifications
• 10GBASE-CX specifications
• 10GBASE-ZR/ZW SFP+ specifications
• 10GBASE-ER CWDM SFP+ specifications
10GBASE-SR/SW SFP+ specifications
The 10GBASE-SR/SR SFP+ provides 10 GbE service at 850 nm.
The following table lists the specifications for the 10GBASE-SR/SW SFP+. The part number
of this SFP+ is AA1403015-E6.
For more information about the 10GBASE-SR/SW SFP+, including test and measurement
information, see the IEEE 802.3ae standard.
Caution:
Risk of equipment damage
To prevent damage to the optical receiver, ensure that at least 1 dB of attenuation exists
between the transmit and receive ports.
Table 23: IEEE 802.3ae 10GBASE-SR/SW SFP+ specifications
Data rate
Line rate (64B/66B code)
Mean Time Between Failures (MTBF) 675 000 hours
Center wavelength range
Distance
Installation — SFP, SFP+, XFP, and OADM Hardware Components
on page 85
Parameter
on page 79
on page 80
on page 83
on page 84
on page 86
on page 87
Specifications
10.0 Gb/s
10.3125 gigabits per second (Gb/s) ± 100 parts per
million (ppm)
840 to 860 nanometers (nm), nominal 850 nm
Using 62.5 µm MMF optic cable:
• 160 MHz-km fiber: 2 to 26 m
• 200 MHz-km fiber: 2 to 33 m
Using 50 µm MMF optic cable:
SFP+ transceiver specifications
August 2013 79