Avaya C360 Installation And Configuration Manual page 182

Avaya C360 Layer 3 Features
182 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
In order to...
Set the source list, destination
list, and destination module for
copying an entire Policy List
Set the DSCP-to-COS mapping.
Based on range and action
parameters, system will apply
mapping to frames
Designates which original frame
fields influence internal queues
selection
Assign a name to a Policy List
Add the name of an owner to a
Policy List
Delete an access-list element or
a Policy List
Activate a Policy List
Deactivate a Policy List
Display the DSCP to CoS map
of a policy-list
Set the list cookie for a specific
policy list
Display an access list
Activate the "simulate" process
for a packet containing a specific
field
Test the validity of a Policy List
Display the active policy-list
number
Display the DSCP to CoS map
of a policy-list
Display summary information
regarding all configured access
lists
Use the following command...
ip access-list-copy
ip access-list-dscp operation
ip access-list-dscp trust
ip access-list-name
ip access-list-owner
no ip access-list
ip access-group
no ip access-group
show ip access-list dscp
ip access-list-cookie
show ip access-list
ip simulate
validate-group
show ip access-group
show ip access-list-dscp
show ip-access-list-summary
2 of 3