Applying Effects To A Group - Native Instruments Groove production studio Manual

3. As an example, let's choose the
find the parameters displayed in the Control area of Module 2:
4. Now you can try out some of the parameters: turn the
adjust the stereo width by using the
If you have VST/AU effect plug-ins installed you may also load them from the effects menu
by selecting Plug-ins from the list.
9.2

Applying Effects to a Group

You can apply four effects directly to each Group. The effects will then be applied to all the
Sounds in the Group.
Hardware
1. In Control mode, press Button 2 to put the focus on the GROUP tab which gets selected
on the left display, then press the GROUP button of the Group you want to apply the ef-
fect to.
2. Press Button 4 to put the focus on the MODULES tab.
3. On the right display, you can now see the Modules 1-4. Select Module 1 by pressing But-
ton 5.
4. To select an effect for Module 1, press SHIFT + BROWSE. The right display now shows
the list of the available effects.
Reverb effect. After selecting it with the mouse, you will
Stereo knob.
Applying Effects to a Group
Size knob for a bigger Reverb or
MASCHINE - Manual - 176
Using FX