Native Instruments Groove production studio Manual page 168

The Resochord on the software.
Screen Element
Pitch
Mode
Spread
Style
Chord
Transpose
Color
Brightness
Feedback
Decay
Mix
Description
Here you can select between the two modes of the Resochord: Chord and
String. In Chord mode, the 6 combs are tuned according to various chords.
In String mode, the 6 combs are centered around 1 frequency and can be
spread for an intense chorus-like effect. Depending on your selection the
other parameters in the Pitch area will change.
Spread is only available if String mode is selected. It allows you to define
how big the difference in tuning is between combs.
Style is only available if Chord mode is selected. You can select between
different chord-styles such as minor or major.
Chord is only available if Chord mode is selected. Here you can choose
from different chords to be applied to your audio signal.
Transpose is only available if Chord mode is selected. It allows you to
transpose the Resochord in semitones.
This is to determine the basic sound characteristic of the Resochord: high-
er values will brighten the sound by adding high frequencies.
Adjust the amount of the Feedback here.
With Decay you adjust how fast the Resochord fades out.
Mix lets you adjust the amount of the effect in relation to the dry original
audio signal.
The Effects Overview
Delay
MASCHINE - Manual - 168