Accessing Macro Controls From The Hardware - Native Instruments Groove production studio Manual

The white dot next to the Macro control.
When the MIDI CC has been received, the white dot will stop flashing.
Macro Controls can also be controlled by Host Automation. Each MASCHINE Macro Control
has a unique Automation ID, which is provided to your host/DAW by the MASCHINE plug-in.
5.1.4

Accessing Macro Controls from the Hardware

To access the Macro Controls:
1. Press CONTROL to enter Control mode.
2. Select the Group with the Macro Controls you want to access by pressing a Group button
A-H.
3. Press Button 2 to select GROUP.
4. Press Button 7 to select MCR (Macro).
5. You can now change the parameters you assigned in the MASCHINE software using Knobs
1-8.
Creating Groups
The Group Property Pages
MASCHINE - Manual - 98