Native Instruments Groove production studio Manual page 196

Hardware
1. Enter Pattern mode by pressing PATTERN and lock it by pressing Button 1 at the same
time.
2. Choose your Pattern by selecting it with the pads.
3. To select the Pattern Banks A-D press Buttons 5 (Bank A) , 6 (Bank B), 7 (Bank C) or 8
( Bank D). The right display gives you an overview of the available Patterns with the se-
lected Pattern highlighted. The selected Pattern will automatically be inserted into the se-
lected Scene.
Overview of the Patterns on the right display.
► To remove a Clip from a Scene, press Button 4 labelled REMOVE. For further information
regarding the Pattern mode, take a look at chapter
↑7, Working with Patterns
Software
► Select the Pattern you want to use in the Scene by clicking on it in the Pattern Editor:
Selecting Pattern 3.
→ A Clip with the selected Pattern will be automatically inserted into the focused Scene col-
umn in the Arranger.
(Software).
Creating and deleting a Clip in the Arranger
↑6, Working with Patterns (Hardware)
Creating a Song using Scenes
and
MASCHINE - Manual - 196