The Master Output Tab (Out) - Native Instruments Groove production studio Manual

2. Click GRV in the Parameter Page buttons.
The Master Swing setting on the software.
12.1.4

The Master Output Tab (OUT)

Hardware
To access the Output settings:
1. Press CONTROL to enter Control mode.
2. Press Button 1 to select MASTER.
3. Press Button 8 to select OUT.
4. Turn Knob 1 to change the Master OUTPUT channels.
5. Turn Knob 2 to change the Master LEVEL output.
6. Turn Knob 3 to change the PAN of the output signal.
Software
To access the Output settings:
1. Select the MASTER
2. Click OUT in the Parameter Page buttons.
tab.
The Master Section
The Master Parameter Pages
MASCHINE - Manual - 228