Native Instruments Groove production studio Manual page 210

Display Element
TEMPO
BPM
DETECT MODE
SENS
TEMPO
BPM
EDIT
The EDIT mode in the SLICE tab.
Display Element
SELECTION
SLICE
SLICE
START
Description
Determines the tempo of the Sample: available options are
MANUAL.
Shows the BPM based on the Tempo settings above; if
ed, you can dial in a BPM value using Knob 4; if
can choose from multiples of the Tempo calculated by MASCHINE.
In Detect mode, the Sample will be sliced according to its transients.
Sensitivity parameter for the transient recognition (Knob 2). Higher values
will cause more Slices to be detected because more transients will be rec-
ognized, lower values will result in less slices. This parameter should be
adjusted until all the musically significant slices are being detected in the
right display.
Determines the tempo of the Sample: available options are Auto and Man-
ual.
Shows the BPM based on the Tempo settings above; if Manual is selected,
you can dial in a BPM value using Knob 4; if Auto is selected, you can
choose from multiples of the Tempo calculated by MASCHINE.
You can edit separate Slices using the Edit mode. Press Button 5 to enter
Edit mode (see picture of Edit mode below).
Description
Choose the Slice you want to edit by dialing Knob 1 here; the display will
show you which Slice is currently selected. You can also use the pads to
select Slices starting from pad 1.
Here you can adjust the start point of a Slice using Knob 3.
Sampling and Sample Mapping
Controlling Sampling from the Hardware
AUTO and
MANUAL is select-
AUTO is selected, you
MASCHINE - Manual - 210