Native Instruments Groove production studio Manual page 78

Page 1 of 2 from the Sampler Output tab on the software.
Main
Main Output Controls
Output
Level
Pan
If MASCHINE is running as a plug-in, the External Outputs will correspond to virtual outputs
in your host. This allows you to send individual Sounds from MASCHINE to their own mixer
channel within your DAW, for example.
Aux 1
Aux 1 Controls
Destination
Level
Aux 2
Aux 2 Controls
Destination
Level
This is used to define where you want to send your Sound. Available op-
tions are Master, Group, any other Sound within the Project whose Source
type is set to Input, the External Outputs 1-8, and None.
Here you adjust the overall volume level of your Sound.
Defines the pan position of your Sound in the stereo field.
The destination for Aux 1: available destinations are Master, Group, all
Sounds with Input enabled, the External Outputs 1-16 and None.
Here you adjust the level of the signal that gets sent to the Aux 1 destina-
tion.
The destination for Aux 2: available destinations are Master, Group, all
Sounds with Input enabled, the External Outputs 1-8 and None.
Here you adjust the level of the signal that gets sent to the Aux 2 destina-
tion.
The Sampler Parameters in the Sound's Output Tab (OUT)
MASCHINE - Manual - 78
Sound Slots