Groove - Native Instruments Groove production studio Manual

The Group Source tab parameters on the software.
Page Parameters
Voice Settings
Polyphony
Pitch
Tune
5.1.2 Page 2: Groove
Hardware
To edit Group Swing settings:
1. Press CONTROL to enter Control mode.
2. Select the Group you want to edit by pressing a Group button A-H.
3. Press Button 2 to select GROUP.
4. Press Button 5 to select GRV (Groove).
5. Turn Knob 1 to add SWING.
6. Turn Knob 2 to change CYCLE.
7. Turn Knob 3 to turn INVERT on or off.
Parameter Description
Here you can define a voice limit for the Group. The default value is 16,
the minimum 1 and the maximum 32 voices.
This parameter provides tuning for the Group as a whole: all Sounds of the
Group will be tuned together. Dial it to the right to get a higher pitch and
to the left to get a lower pitch.
Creating Groups
The Group Property Pages
MASCHINE - Manual - 93