Native Instruments Groove production studio Manual page 186

6. You now can select your external source by turning Knob 2. Then select a module slot by
pressing Button 6.
7. Press SHIFT + BROWSE: now you see the list of the available effects.
8. Choose an effect and load it using Button 8. Now the external audio will be processed by
the effect.
Software
1. Choose an empty Group by selecting it in the Arranger, then choose one of the Sound
slots by clicking on it.
2. Select the SOUND
3. On the right of the Module
sented with several options in the drop-down menu: Sampler, Input and MIDI Out. Select
Input.
4. You will now see two parameters: one knob for the Level of the external input and a but-
ton that lets you select a Source. Select Ext In 1 as the Source.
5. Click on the Module
menu from the upper right corner of the Module
tab and then click on Module 1.
1 tab, you will find an Arrow. Click on it and you will be pre-
2 next to the INPUT Module and select an effect using the effect
2 tab.
Using FX
Applying FX to an External Instrument
MASCHINE - Manual - 186