Loading Groups Without Patterns - Native Instruments Groove production studio Manual

Renaming a Group.
Naming is only available from within the software, but any changes will also show up on the
hardware.
5.7

Loading Groups without Patterns

If you want to build a Group from scratch, you can load Groups without Patterns both on the
MASCHINE hardware controller and MASCHINE software. In this case, previously loaded Pat-
terns will not be removed, enabling you to try out a Pattern using different Sounds.
Hardware
1. On the hardware, select a Group with the Group Buttons A-H, then enter the Browser by
pressing BROWSE and select the Group tab by pressing Button 2
2. Use Button 1 to set the file type to GROUP and then choose the Browser filter settings.
3. On the right display you can now select whether you want to load the Group with or with-
out its PATTERN content by pressing Button 7. If Pattern is highlighted, the Pattern con-
tent will be loaded together with the Group.
A selected Group with Pattern load option activated.
Software
1. To load a Group without a Pattern, select the Group in the Browser's Search Result list.
2. Uncheck the checkmark in the bottom of the Browser.
Creating Groups
Loading Groups without Patterns
MASCHINE - Manual - 105