Native Instruments Groove production studio Manual page 214

Sampling and Sample Mapping
Controlling Sampling from the Hardware
The EDIT tab on the software.
(1) Start and End of the Sample
Adjust the Start and End point by either dragging the small grey icons labeled "S" (for Start)
and "E" (for End) left and right using the mouse, or by entering the Start and End points in
their respective fields.
(2) Loop Settings
Here you can define a Loop by clicking on the Loop button. The Loop will be repeated as long
as the note is triggered, which can be useful to loop a whole Sample or part of it in order to
simulate a longer tone. The Start and End point can be edited by entering the Start and End
points in their respective fields. Alternatively you can also alter the Start and End of the Loop
by dragging the handles of the Loop and move the entire Loop by dragging its title bar. Cross-
fade allows you to define a crossfade value between the end and the start of the Loop.
(3) Info Bar
Displays the file name and the length of the currently edited Sample.
MASCHINE - Manual - 214