Applying Effects To The Master - Native Instruments Groove production studio Manual

3. Since our Group is mainly for drums, let's apply some compression by adding the Com-
pressor to Module 1:
4. Play around with the parameters of the Compressor to get used to it!
If you have VST/AU effect plug-ins installed you may also load them from the effects menu
by selecting Plug-ins from the list.
If you created a nice FX setting, you can put it to further use by saving it as an FX Preset.
Please read ↑9.8, Saving FX Presets
If you created a nice FX setting, you can put it to further use by saving it as an FX Preset.
Please read ↑9.8, Saving FX Presets
9.3

Applying Effects to the Master

You can apply four effects to the Master so that all your Sounds and all your Groups together
are being sent into the effect.
Hardware
1. Press Button 1 to put the focus on the MASTER tab which gets selected on the left dis-
play.
2. On the right display, you can now see Modules 1-4. Select Module 1 by pressing Button
5.
for more details.
for more details.
Using FX
Applying Effects to the Master
MASCHINE - Manual - 178