Chapter 4. WIRING
4 - 3
To connect a line to the terminals, use crimp-style solderless wire connectors that fit an M3.5 screw.
Handling Precautions
4-4
Making Terminal Connections
•If the DCP552 is mounted in a location subject to noticeable vibration or
impact, be sure to use round crimp-style solderless wire connectors to
prevent lines from becoming disconnected from the terminals.
•Be careful not to allow any of the crimp-style solderless wire connectors to
touch adjacent terminals or connectors.
•The terminal screws shall be tightened to 0.78 to 0.98 N
Unit : mm
¿3.7
m torque.
•