Download Print this page

Honeywell DC1000 Series Program Configuration Manual

Hide thumbs

Advertisement

Quick Links

DC1000 Series Program Configuration Guide
Operation Mode
Program Mode
How to move from a MODE to another
(1)
Press 'SET' key for 5 seconds, it grants access to 'Configuration 1' mode or return to
'Operation' mode from 'Configuration 1' mode.
(2)
Press 'SHIFT' key for 5 seconds while pressing 'SET' key first, it grants access to
'Configuration 2' mode or return to 'Operation' mode.
(3)
All parameters related to program configuration will be displayed next to parameters in
'Operation' mode. (* These parameters will be shown in program model only)
CAUTION
DO NOT access to 'Set Up' mode without instruction from techical assistant.
(3)
(3)
(1)
Configuration 1
(2)
Configuration 2
Set Up Mode
(2)

Advertisement

loading

  Also See for Honeywell DC1000 Series

  Related Manuals for Honeywell DC1000 Series

  Summary of Contents for Honeywell DC1000 Series

  • Page 1 DC1000 Series Program Configuration Guide Operation Mode Configuration 1 Program Mode Configuration 2 Set Up Mode How to move from a MODE to another Press ‘SET’ key for 5 seconds, it grants access to ‘Configuration 1’ mode or return to ‘Operation’...
  • Page 2 1. Program Function The program function of DC1000 has 2 programs, and each program has Max. 8 segments. Each segment can be defined as a period of “RAMP” or “SOAK” status. 2. Terminologies Program : A pattern which consists of some segments Segment : A RAMP status or a SOAK status RAMP status...
  • Page 3 Start from Operation Mode Set program pattern Set point for Seg.5 Range: 0~2 Program segment display Set time for Seg.5 ‘Pattern’ – ‘Segment’ Range: (1,2,0)-(1~8) Program timer display Set output for Seg.5 Range: 99hour 59min Set point for Seg.1 Set point for Seg.6 Range: LSPL~USPL Set time for Seg.1 Set time for Seg.6...