Honeywell DCP552 Mark II User Manual page 89

Message key function (when variable parameter PA03 is set to 0)
Cycles through the message panel displays.
• When CH1 is displayed: Display C1, display C2, display C3, display C4,
• When CH2 is displayed: Display C1, display C2, display C3, display C4,
Display C1
Display C2
Display C3
Display C4
Display C5
Display C6
Display C7
Handling Precautions
• Models with CP computation compensation the CH2 PV values have
display C5, display C6, display C1.
display C5, display C6, display C1.
the following meaning depending on variable parameter PA44 settings.
• When PA44 is set to 0: CP value (unit: %) or PO
• When PA44 is set to 1: millivolt voltage value (unit: mV)
• When PA44 is set to 2: O
Chapter 6. OPERATION
values (unit 10
2
sensor impedance value (unit: kΩ)
2
-20
atm)
6-7