Semi-Automatic Sheet Feeder (Sasf) Operation - OKIDATA ML320 Service Manual

Page: 37
Service Guide ML320/ML321
Chapter 2 Principles of Operation

2.4.06 Semi-Automatic Sheet Feeder (SASF) Operation

When the paper release lever is set for friction feed paper, opening the bail arm causes the
SASF switch to close. The line feed motor feeds two inches of paper. SASF motion stops
after two inches of paper feed motion and paper-end is detected.
SASF should be used for loading tractor feed paper. Okidata recommends using SASF instead
of pressing FORM FEED. Since the paper bail is opened for SASF, there is less chance of
jamming.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)