Power Supply Boards Rev C - OKIDATA ML320 Service Manual

Power Supply Boards Rev C

NOTES: The Rev D printers do NOT have a power supply board. The control board contains
circuitry to provide the power supply function.
Refer to Appendix A for more information on this board.
Perform these procedures first:
- 3.2.01 ( )
- 3.2.04 ( )
- Push the board clamp claw (1) in the direction of arrow A.
- Lift the B side of the power supply board (2).
- Detach the cable from the connector (3).
Part Item
Number Description
Service Guide ML320/ML321
Chapter 3 Maintenance & Disassembly
Product Commen
t
App. B
Revision
Reference
Page: 55