Power Supply (Paii-2) - Rev A And B - OKIDATA ML320 Service Manual

A.2.04 Power Supply (PAII-2) - Rev A and B
Function
This board converts and regulates the AC voltage input to DC voltage and supplies the
DC voltage to the control board.
Firmware
NONE
Fuses
F1 2.0 amp / 250 VAC
Jumpers
NONE
Sensors
NONE
Switches
NONE
Test Points
CN2: Pin 1
CN2: Pin 6
CN2: Pin 10 + 8 vdc
Notes
CN1 connection from Transformer
CN2 connection to Power Interconnect Module
+ 40 vdc
+ 5 vdc
Service Guide ML320/ML321
Chapter A Reference Charts
Page: 122