Paper End (B) Lever - OKIDATA ML320 Service Manual

3.2.28 Paper End (B) Lever

NOTE: The paper end lever guide is accessed from the bottom of the printer.
Perform these procedures first:
- 3.2.01 ( )
- 3.2.02 ( )
- 3.2.04 ( )
- 3.2.05 ( )
- 3.2.06 ( )
- 3.2.20 ( )
- 3.2.22 ( )
- 3.2.25 ( )
- 3.2.26 ( )
- 3.2.27 ( )
- While pushing on the six claws (1), detach the sensor cover (2). Four of the six claws
are visible in the illustration.
- Lift the paper end (B) lever (3) from the chassis.
Service Guide ML320/ML321
Chapter 3 Maintenance & Disassembly
Page: 76