Tractor Assembly - OKIDATA ML320 Service Manual

3.2.26 Tractor Assembly

NOTE: Horizontal movement of the left tractor is restricted by a stopper on the lower cover.
Perform these procedures first:
- 3.2.01 ( )
- 3.2.02 ( )
- 3.2.04 ( )
- 3.2.22 ( )
- 3.2.25 ( )
- Use a needle nose pliers to release the claw (1) of the tractor gear (2) from the groove
(3) in the lower tractor feed shaft (4). The lower tractor feed shaft is square.
- Remove the tractor gear.
- Lift the lower tractor feed shaft above the guide (5).
- Slide the lower tractor feed shaft in the direction of arrow B until the C side is free of the
guide hole (6).
- Lift the upper tractor feed shaft (7) above the guide (8). The upper tractor feed shaft is round.
- Remove the tractor assembly (9).
- Raise the lock levers (10) on the left (11) and right (12) tractor assemblies.
- Remove the left tractor assembly, the sheet guide (13), and the right tractor assembly.
Service Guide ML320/ML321
Chapter 3 Maintenance & Disassembly
Page: 74