3.2.21 Line Feed Motor Interconnect Module
NOTE: Use care when performing this procedure. The plastic extension will break if too much
pressure is applied.
Perform these procedures first:
- 3.2.01 ( )
- 3.2.02 ( )
- 3.2.04 ( )
- 3.2.05 ( )
- 3.2.06 ( )
- 3.2.20 ( )
- Insert a straight-slot screwdriver between the line feed motor interconnect module (1) and
the chassis. Then, carefully pry the module from the two guide holes (2).
Part
Item
Number
Description
Service Guide ML320/ML321
Chapter 3 Maintenance & Disassembly
Product
Commen
t
App. B
Revision
Reference
Page: 69