Power Interconnect Module / Cable Guide (Rev A & B) - OKIDATA ML320 Service Manual

3.2.11 Power Interconnect Module / Cable Guide
Revs A and B
NOTES: The Rev A and B printers do NOT have a cable guide.
The Rev C and Rev D printers do NOT have a power interconnect module.
Rev C and Rev D printers have a cable guide.
Perform these procedures first:
- 3.2.01 ( )
- 3.2.04 ( )
- Use a straight-slot screwdriver to release the claws (1) from the chassis clamps (2).
- Remove the power interconnect module (3).
Service Guide ML320/ML321
Chapter 3 Maintenance & Disassembly
Page: 56